Paint System Multi Pack Non Aircraft Use Low VOC Finish Near Matt Black Def Stan 80-225 NSN8010992173947


A high solids, solvent based two pack Polyurethane finish designed for use on military vehicles and ground equipment. When used over an appropriate primer, the finishing scheme satisfies the infra-red camouflage requirements of DEF STAN 00-23 and the Chemical Agent Resistance Coating (CARC) requirements of DEF STAN 00-72.

hmg tin photo

Data Sheets

Technical Properties


12.5 square metres per litre @ 40 microns dft


27 °C


Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Maximum VOC Content

0.42 Kg/l

Colour Range





Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.

Health & Safety

  • Refer to SDS and tin label prior to use.
  • RFU product contains isocyanates. Suitable air fed respiratory equipment should be worn when spraying.
  • Refer to JD11/77 health and safety data sheet.

Additional Information

Induction time:- 15 mins
Mixing time:- After 15 minutes - mechanical shaking on gyro - 3 mins
By hand until thoroughly mixed.

Humidity data:- see graph below:

Humidity Graph


26/07/2019 00:00:00

Getting in touch.

To place an order or to find out more about HMG Paints get in touch via the details below.