High Temperature Aluminium 4036

TOPALM4036


An air drying silicone based paint specifically formulated to enable the dried film to tolerate high temperatures of up to 500ºC. The full physical properties of the system are achieved after baking at temperatures above 220ºC (at this temperature the free silicone resins in the system auto cross link). At temperatures of up to 300ºC there is virtually no decomposition of the silicone binder. Above 300ºC the silicone is gradually driven off without charring or flaking of the paint. From 300 - 500ºC. The finish is still efficient because, the pigment film sinters on to the metal surface.

hmg tin photo

Data Sheets

Technical Properties

Coverage

16 square metres per litre @ 15 microns dft

Flashpoint

24 °C

Temperature Resistance

500 °C

Storage

Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Maximum VOC Content

0.700 Kg/l

Regulations

Not Applicable

Colour Range

Silver

Cleaning

Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.

Surface Preparation

Do not use Primer

Health & Safety

  • Refer to SDS and tin label prior to use.
  • Suitable respiratory equipment should be worn when spraying.

Issued

20/03/2014 16:35:00

Getting in touch.

To place an order or to find out more about HMG Paints get in touch via the details below.