2K Multi Surface Topcoat Gloss Satin and Matt


A 2K Polyurethane finish which offers good durability and hardness coupled with ease of use. It has very good adhesion to a variety of substrates such as:- Brass, Copper, Stainless Steel, Zintec, Mild Steel, Aluminium, Anodized Aluminium, Glass Fibre, Glass, Perspex, Foamex, Plastic, Kevlar, Galvanised Steel and PVC Curtains. It can also be used as an in-mould coating. 3 Sheen levels are available: Gloss, Satin & Matt: Mixing Ratios (when tinted): Gloss 5 Base:1 Hardener Satin 8 Base:1 Hardener Matt 9 Base:1 Hardener To be used as part of the HMG Unit Mixing Scheme. Full tinting details are given on HMG ColourBase. For Binders please see seperate Data Sheet.

hmg tin photo

Data Sheets

Technical Properties


8-10 square metres per litre @ 25 microns dft


26 °C


Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Maximum VOC Content

0.470 Kg/l

Colour Range

Available in a wide colour range including Fleet, RAL & BS and Automotive shades


Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.

Surface Preparation

Please refer to Knowledge Base on our website for details on Surface Preparation.

Health & Safety

  • Refer to SDS and tin label prior to use.
  • RFU product contains isocyanates. Suitable air fed respiratory equipment should be worn when spraying.


28/05/2013 00:00:00

Getting in touch.

To place an order or to find out more about HMG Paints get in touch via the details below.