A high quality Fluorescent Cellulose product for Automotive and Industrial use. To be used as part of a 3 coat system.
Cellulose Fluorescent is a three coat system.
1) Cellulose White Primer such as HMG APS White Primer
2) Cellulose Fluorescent
3) Overcoat with Acrythane 2K Clearcoat to attain gloss, improve durability and help protect against UV degradation
20 square metres per litre @ 20 microns dft
Up to 80 °C
Store between 5°C - 25°C. When not in use, cans must be kept sealed
12 months from delivery date in original sealed containers
The light-fastness of fluorescent pigments (all grades) is between 2 - 3 on the Blue Wool Scale (of 8). This level of colour fastness is increased to 3 - 4 by over-lacquering with a UVRA containing clear varnish or lacquer. Please ask our Technical Service Department for specific recommendations.
In all environments, Fluorescent paints will fade 5 - 10 times faster than conventional industrial, decorative or automotive coatings.
SIGNAL GREEN SUITABLE FOR SMALL AREAS ONLY.
For use in Aerosol, Classis Car Refinish and Industrial Applications
Not to be used in connection with 2004/42/CE
Not to be Used under SI2005:27773
Blaze, Fire Orange, Rocket Red, Solar Yellow, Signal Green, Aurora Pink and Horizon Blue.
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of Preparatory Cleaners suitable for most cleaning and degreasing processes. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.
Cellulose Fluorescent is a three coat system. 1) Cellulose White Primer such as HMG APS White Primer 2) Cellulose Fluorescent 3) Overcoat with Acrythane 2K Clearcoat to attain gloss, improve durability and help protect against UV degradation. Please refer to Knowledge Base for details on Surface Preparation.