D66 Economy Line

TOPD66


An alkyd based synthetic enamel designed for general purpose brush and spray requirements. It gives good performance and is oil and diesel resistant making it a good choice for agricultural, appliance & machinery finishes.

hmg tin photo

Data Sheets

Technical Properties

Coverage

10 square metres per litre @ 50 microns dft

Flashpoint

31 °C

Storage

Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Maximum VOC Content

0.445 Kg/l

Regulations

Out of Scope

Colour Range

Available in a wide colour range including RAL & BS shades

Cleaning

Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.

Surface Preparation

Please refer to Knowledge Base for details on Surface Preparation.

Health & Safety

  • Refer to SDS and tin label prior to use.
  • Suitable respiratory equipment should be worn when spraying.
  • Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting Lid.

Issued

22/09/2005 16:35:00

Getting in touch.

To place an order or to find out more about HMG Paints get in touch via the details below.