Industrial Cellulose


A fully comprehensive range of clear and pigmented lacquer finishes for high quality industrial finishing of all types, particularly over both hard and softwood substrates. HMG industrial cellulose gives high build, high gloss and great simplicity of use. These properties combined offer the user a quick and economical way to achieve a high standard of work.

hmg tin photo

Data Sheets

Technical Properties


10 square metres per litre @ 50 microns


-4 °C

Temperature Resistance

70 °C


Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Maximum VOC Content

0.66 Kg/l


Not to be used in connection with 2004/42/CE

Not to be Used under SI2005:27773

Colour Range

Available in a wide colour range including RAL & BS shades


Over Wood: Fill grain as appropriate using good quality wood filler. Flat thoroughly using 180 - 240 Garnet Paper. Tak rag surface. Apply HMG Spirit Stain if appropriate. HMG Sanding Sealer or HMG Pre-Cat Sanding Basecoat are used on woods subject to grain raising prior to application of Industrial cellulose lacquers. Pre-treatment: Under 'pigmented' Industrial Cellulose colours on wood and on steel substrates a variety of HMG Build Up systems can be used including: HMG E9 White/Grey Primer, and HMG 2 Pack or Stoving Primer Systems. NB: If Industrial cellulose is to be used over aluminium and alloys an HMG etch primer or Washfiller must be used. For full advice on priming difficult substrates, please contact: HMG Technical Support.

Health & Safety

  • Refer to SDS and tin label prior to use.


22/09/2005 16:35:00

Getting in touch.

To place an order or to find out more about HMG Paints get in touch via the details below.