2K Epoxy Zinc Primer ZF26


An high build 2K Epoxy Primer containing advanced zinc morphology pigmentation for the ultimate in cathodic protection. It can be overcoated quickly without aeration problems. Product dries to a metallic grey/blue finish, which can be rubbed with wire wool to give a galvanised metallic effect, if required.

hmg tin photo

Data Sheets

Technical Properties

Coverage

7 square metres per litre @ 55 microns dft

Flashpoint

49 °C

Temperature Resistance

Over short periods 200 °C

Storage

Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Maximum VOC Content

0.460 Kg/l

Regulations

2004/42 IIB (C) 540

Colour Range

Metallic Grey/Blue

Cleaning

Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.

Surface Preparation

Please refer to Knowledge Base for details on Surface Preparation. Under no circumstances use a pre-primer or rust conversion coating prior to application.

Health & Safety

  • Refer to SDS and tin label prior to use.

Issued

19/06/2026 16:35:00

Getting in touch.

To place an order or to find out more about HMG Paints get in touch via the details below.