Fast drying 1K lacquer with good film build and excellent application characteristics. Available in a range of clear sheen finishes. Formulated for use on wood substrates. Not suitable for exterior use.

An air drying silicone based paint specifically formulated to enable the dried film to tolerate high temperatures of up to 500ºC. The full physical properties of the system are achieved after baking at temperatures above 220ºC (at this temperature the free silicone resins in the system auto cross link). At temperatures of up to 300ºC there is virtually no decomposition of the silicone binder. Above 300ºC the silicone is gradually driven off without charring or flaking of the paint. From 300 - 500ºC. The finish is still efficient because, the pigment film sinters on to the metal surface.

An air dying silicone based paint specifically formulated to enable the dried film to tolerate high temperatures up to 300 ºC. The full physical properties are achieved after baking at temperatures above 220 ºC (at this temperature the free silicones in the system auto cross link) At temperatures of up to 300 ºC there is virtually no decomposition of the silicone binder. Above 300 ºC the silicone is gradually driven off. NB. An outstanding feature of AR141 is that gassing and smoking are significantly reduced when it first attains high temperature. This is of particular advantage in the automotive field, and when AR141 is use in confined spaces.

A high performance, rapid curing, high build, general purpose Stoving Enamel. It combines excellent colour and gloss retention together with good physical properties. It is suitable for most domestic and industrial applications where it offers fast production turn around combined with economy and good technical properties.

A high performance, rapid curing, high build, general purpose Stoving Enamel in a hammer finish. It combines excellent colour and gloss retention together with good physical properties. It is suitable for most domestic and industrial applications where it offers fast production turn around combined with economy and good technical properties.

A water white, clear vinyl resin based coating, which has excellent abrasion, chemical and corrosion resistance. It is thermoplastic and very flexible, exhibiting excellent resistance to attack by alkalis, mineral acids, alcohols, greases, oils or aliphatic hydrocarbons, whilst affording extremely good adhesion to chrome, brass and polished metals. Chrome & Brass Lacquer is NOT recommended for use outdoors or where it is exposed to strong ultra violet light.

A 1K MIO anti-corrosive vinyl topcoat. Particularly designed for use in severe corrosive environments. Supplied ready for use, the product can be applied by airless spray or brush, without fear of undue sagging or running.

A 1K MIO anti-corrosive vinyl topcoat. Particularly designed for use in severe corrosive environments. Supplied ready for use, the product can be applied by airless spray or brush, without fear of undue sagging or running.

A 1K Vinyl Acrylic with exceptional flexibility and adhesion. HMG PVC 17 is suitable for coating most PVCu, hard plastics (not GRP) and powder-coated surfaces (architectural cladding). If in doubt, a small trial should be carried out in a localised area to ensure adhesion and compatibility with the surface. PVC17 is not suitable for coating areas incorporating draught seals and gaskets.

A premium quality water-based, flat matt emulsion for interior use on wall and ceiling surfaces, where a flat non-reflective finish is required.

A premium quality water-based, silk emulsion for interior use on wall and ceiling surfaces, where a washable high sheen finish is required.

A water-based decorative trade matt emulsion that has excellent opacity that improves as the paint dries. Excellent results can be achieved with a single coat. Designed for easy application on interior plaster walls and ceilings.